Grind & Seal Flooring
Grind & Seal Flooring was the original form of polished concrete before Mechanically Polished Concrete became available. Today, it is considered a more budget friendly flooring option for internal applications. A Grind & Seal can be completed on new or existing concrete slabs across both residential and commercial projects. As with all topical coatings this type of flooring can be prone to wearing and may need to be recoated every few years depending on the rate of wear.
- Fully Qualified and Insured
- QBCC Licence No. 15435907
- Residential & Commercial
- New & Existing Floors
Get a free quote
Fill in the form below or call us now to organise a quote
Products and Services
Grind & Seal Flooring
The process starts by grinding the concrete to the client's desired level of stone exposure. The floor is then refined with only one or two finer grits before a clear topical coating is applied, with the coating providing the floor with sheen and protection. A grouting service is optional and is discussed on a case-by-case basis. The gloss level of the floor is chosen by the client and can range from Matte Gloss to a High Gloss depending on the specific sealer being installed. Return to service and exclusion times vary depending on the sealer used.
Where possible we like to organise a free on site meeting to get a clear understanding of what your specific aesthetic preferences are, how the space will be used, measure the area and discuss any relevant information. This helps us supply an accurate quote and empowers you with as much information as possible for you to make an informed decision on your flooring investment.
Customising your floor
Stone Exposure
Grind & Seal Flooring allows the client to choose either Minimum or Full Stone Exposure.
Minimum or Partial Aggregate Exposure
The floor is given a light grind removing approximately 1mm-3mm of the concrete surface depending on the individual slab characteristics. This results in a variable amount of stone exposure across the floor from areas with no stone showing at all to light salt and pepper in some areas and even some areas with full stone exposure. The level of aggregate exposure across the floor is influenced by a number of factors including; flatness of the slab, the hardness and porosity of the slab, and where the aggregate physically sits within the layers of the concrete.
The finish results in a more natural look that shows the unique character of the specific floor while maintaining a minimalistic aesthetic.
Full Stone Exposure
A very aggressive diamond grind is performed removing as much as 3mm-5mm in a single grinding pass. This reveals a very consistent amount of aggregate exposure across the entire floor area.
Customising your floor
Gloss Level
The gloss level of a floor refers to the amount of reflection present on the floor. This ranges from a Matte/Satin finish to a High Gloss with increased refinement providing a higher level of reflectiveness.
Matte/Satin Gloss
A low sheen finish that gives a more industrial feel to the space and can make any imperfections in the floor less obvious.
High Gloss
A high sheen finish that can boost the natural and ambient lighting in every room. It can also highlight any imperfections in the floor such as high or low spots.
How it's done
Grind & Seal Process
-
Completion of a site visit to gather details about the concrete slab, your requirements and expectations and to measure the area.
-
An in depth quote is provided detailing every step we propose to perform on your floor to achieve the desired outcome. Our quotes are usually very accurate and not likely to change unless you request a variation. The accompanying quote also includes some important information including our Pre Commencement Details, Terms and Conditions and some photos of similar jobs we have recently completed.
-
After accepting the quote we will work with you through the booking process and lock in a date to start working on your floor.
-
Our punctual tradespeople will arrive on site as arranged and get straight to work. If there is existing flooring such as tiles, timber or laminate etc this is removed before we start grinding the floor to your chosen exposure level.
-
The grouting stage is optional. This step uses specially formulated chemicals that combines with the concrete dust grinded from your floor to create a slurry which fills in most of the small cracks, aeration holes, pitting and small chips etc helping to create a very consistently smooth surface. Because this process uses the concrete dust from your floor these repairs usually blend in seamlessly leaving the cracks etc almost invisible. Any larger cracks and holes are patched by hand which may not match the existing concrete exactly.
-
Once the floor is prepared, we begin applying the sealer to the floor. Depending on the specific sealer we may be able to apply multiple coats on the same day, or we might have to allow the sealer to cure over night before applying subsequent coats.
Gallery
Our recent work.








Credentials & quality
Qualified, insured,
bespoke.
At Polished Living, our experienced and qualified tradespeople deliver bespoke decorative concrete floor finishing, customised to each client's specific slab and requirements. As a professional trade services company we are fully registered, licenced and insured with a commitment to providing clients with quality service and high end floors that stand the test of time.
- Fully Qualified and Insured
- QBCC Licence No. 15435907
- ABN 93 669 643 038
- Committed to ongoing professional development
Master Buildersmember
Where we work
Coast to country.
Brisbane
Northside to bayside, inner city to the western suburbs — Chermside, Carindale, Indooroopilly, Wynnum and everywhere between.
Moreton Bay Region
Caboolture, Morayfield, Burpengary, Narangba, Redcliffe, Strathpine, Samford and Bribie Island.
Sunshine Coast
Caloundra, Kawana, Maroochydore, Buderim, Nambour, Coolum, Noosa and the hinterland.
Fraser Coast
Hervey Bay, Maryborough, Burrum Heads, Toogoom, River Heads and Tiaro.
Toowoomba
Toowoomba city, Highfields, Westbrook, Glenvale, Oakey, Pittsworth and Crows Nest.
Ipswich
Ipswich city, Springfield, Ripley, Redbank Plains, Karalee, Rosewood and Marburg.
Wide Bay & South Burnett
Kingaroy, Nanango, Murgon, Wondai, Blackbutt, Yarraman and the farms between them.
Other Location?
We can come to you, call us today to discuss on 0437 396 651